Sun Ultra 80 Rack Mount Installation Guide; Preparing Your Site - Sun Microsystems Ultra 80 Installation Manual

Sun Ultra 80 Rack Mount
Installation Guide
This document describes how to install a Sun Ultra™ 80 workstation (the system)
into a rack configuration using the optionally purchased rack-mounting kit.

Preparing Your Site

Prior to rack-mounting your system, ensure you have adequate power, ventilation,
and environmental controls to support your rack-mounted system. This includes
rack spacing that allows for front-to-back air flow for cooling your system. See
.
TABLE 1
Site Rack Requirements
TABLE 1
Feature
Floor
Ventilation
Power
Requirement
Before installing the system cabinet ensure that the planned area
floor is level.
To prevent over heating, openings in the rack must not be blocked
or covered. Do not place the rack near a radiator or heating register.
Operate the rack from the type of power source indicated on the
electrical rating label provided on the rack. The rack power cords
must each be connected to dedicated branch circuits of the proper
current capacity.
5