Wacker Neuson AP1840 Series Operator's Manual page 34

12 Troubleshooting,
Fault
The machine switches itself off.
*
Contact your Wacker Neuson contact partner.
34
Possible causes
The charge state of the
rechargeable battery is too low.
The machine was overloaded.
Excess temperature of the
converter.
Under temperature machine
Remedial measure
Charge the rechargeable battery.
Switch the machine on again.
Let the machine cool.
Only operate the machine in the
permissible temperature range
see chapter Technical Data.
100_0202_ts_0017.fm
,