Operating Modes
The digitizer can be operated in two modes: operator mode and service mode.
Operator Mode
The operator mode groups all basic functions which are aimed at
radiographers:
•
Reading an image plate,
•
Reading an emergency image plate,
•
Re-erasing an image plate,
•
Reading the identification data of a cassette.
All functions of the operator mode are described in this manual.
Service Mode
The service mode functions are reserved for trained service personnel. They
are password protected, and they are described in a separate document.
2386G EN 20120110
CR 30-X/CR 30-X
Getting Started with the CR 30-X/CR 30-Xm
M
35