CR 30-X/CR 30-X
M
General safety instructions
•
Make sure that the digitizer is constantly monitored in order to avoid
inappropriate handling, especially by children.
•
Only trained service personnel must make repairs. Only authorized service
personnel must make changes to the digitizer.
•
If there is any visible damage to the machine casing, do not start nor use
the digitizer.
•
Do not override or disconnect the integrated safety features.
•
Do not apply excessive shock or vibration to the digitizer during operation
(e.g. putting cassettes on top of the device). This may decrease the image
quality. Neither should the device be moved during operation.
•
Switch off the device before performing any maintenance work or repairs.
Disconnect the digitizer from the mains before making repairs or
performing any maintenance activities during which live electrical
components may be exposed.
•
As is the case for all technical devices, the digitizer must be operated, cared
for and serviced correctly. A regular quality control is recommended.
•
If you don't operate the digitizer correctly or if you don't have it serviced
correctly, Agfa is not liable for resulting disturbances, damages or injuries.
30
Introduction
2386G EN 20120110