Operating Modes - AGFA ADC Solo User Manual

Operating modes

The ADC Solo can be operated in three modes: operator mode, key-operator
mode, and service mode.
Operator mode
The operator mode groups all basic functions which are aimed at radiographers:
• Reading an image plate;
• Reading an emergency image plate;
• Re-erasing an image plate;
• Reading the identification data of a cassette (Dedicated configuration only);
• Changing the image plate type (Dedicated configuration only).
All functions of the operator mode are described in
('Operator mode')'.
Key-operator mode
The key-operator mode groups advanced functions which are aimed at techni-
cians.
The key-operator mode can be accessed via the Key-operator key on the key-
pad and is menu-driven. The key-operator functions are described in
'Advanced operation ('Key-operator mode')'
Service mode
The service mode functions are reserved for trained service personnel. They are
password protected.
2301D EN 20040224
Chapter 2, 'Basic operation
of the ADC Solo Reference manual.
Chapter 3,
9