AGFA CR 30-X User Manual page 44

CR 30-X/CR 30-X
M
Insert the cassette containing the image plate into the cassette slot [1] as shown
3
below.
Make sure to insert the cassette with the black side to the top and with the shutter
opening mechanism and the locking mechanism inside the digitizer.
Make sure that the cassette is firmly pushed up to the right side of the slot [2].
Otherwise, the digitizer cannot read the image plate.
As a result, the digitizer starts erasing the image plate:
•
The upper part of the status indicator is continuously lighting up in blue.
•
The lower part of the status indicator is flashing green.
When the digitizer has finished erasing the cassette, the upper part of the status
indicator is not lit and the lower part is constantly lit in green.
Remove the cassette from the cassette slot.
4
To erase a second cassette, the erase mode has to be accessed again.
5
44
Operating CR 30-X/CR 30-Xm 2386G EN 20120110