Preparing To Replace Components; Powering Off The System - Sun Microsystems SUN BLADE 150 Installation Manual

Preparing to Replace Components

Follow these procedures to ensure that you safely save data and power off the
system.

Powering Off the System

Caution – Exit from the operating system before turning off system power. Failure
to do so may result in data loss.
1. Back up system files and data.
If Solaris is running in a windowing environment:
I
Momentarily press and release the front panel power switch (
automatically shut down all programs, the operating system, and to power off the
system.
From the system shutdown menu displayed on the monitor, select "Shutdown."
If Solaris is not running in a windowing environment:
I
Press and hold the front panel power switch (
off the system.
Caution – This action forces an immediate power off of the system and unsaved
data is lost.
Power switch
FIGURE 1
2 Sun Blade 150 CD-ROM, DVD-ROM, and Hard Drive Installation Guide • June 2002
Front Panel Power Switch
FIGURE 1
) for four seconds to power
FIGURE 1
) to