Step 7-Startup And Software Configuration - Sierra Wireless AirLink RV55 Hardware User's Manual

AirLink RV55 Hardware User Guide
Step 7—Startup and Software Configuration
You can configure the ALEOS software on the RV55 router using:
•
•
•
•
Configuring with ACEmanager
To access ACEmanager:
1. Connect a laptop to the router with an Ethernet cable.
2. Launch your web browser and go to http://192.168.13.31:9191.
Note: It takes the router 2–3 minutes to respond after power up.
Figure 2-19: ACEmanager login window
3. Enter the default password (printed on the device label) and click Log In.
Note: For system security, ensure that you change the default password as soon as possible.
4. Refer to the ALEOS Software Configuration User Guide for information on how to use
Configuring with AirLink Management Service
AirLink Management Service (ALMS) allows remote management of all your routers from
one user interface.
Some of its features include:
•
•
•
•
•
•
•
To get started, contact your Sierra Wireless Partner or visit
ALMS
Rev. 1 June 2019
ACEmanager (browser-based application)
AirLink Management Service
AirLink Mobility Manager
AT Commands
ACEmanager to configure your RV55 router.
Centralized, remote monitoring for all your AirLink routers and gateways
Continuous status monitoring of important health data such as signal strength
Location monitoring, including world map views
Complete ALEOS reporting and configuration, including historical views of ALEOS
information
Configure individual routers and gateways or use templates to perform batch configu-
rations of your AirLink devices
Single click over-the-air firmware updates to all your routers and gateways
Compatible with all carriers or mobile network operators
(cloud-based application)
(AMM)
38
www.sierrawireless.com/
41113042