Router Configuration And Management; Power Modes - Sierra Wireless AirLink RV55 Hardware User's Manual

Router Configuration and Management

You can configure and manage your RV55 router using:
•
•
•
•

Power Modes

The AirLink RV55 router has three power modes:
•
•
•
Rev. 1 June 2019
ACEmanager —a browser-based router management application
Refer to the ALEOS Software Configuration User Guide available for download at
source.sierrawireless.com.
AirLink Management Service (ALMS)—a cloud-based router management service
provided by Sierra Wireless
For more information, visit
less distributor.
AirLink Mobility Manager (AMM)—a Network Management solution that provides a
consolidated view of the entire vehicle fleet and enables simplified management,
control and monitoring of connected AirLink routers.
AT Commands
For a complete list of AT Commands, refer to the ALEOS Software Configuration User
Guide.
On—The CPU and the radio are on. The current draw is 900 mW (75 mA @ 12 VDC)
when the router is idle (i.e. no traffic is being sent or received).
Standby—The CPU and the radio are off, but can be woken by an I/O input or at a
configured time. Current draw is 53 mW (4.4 mA @ 12 VDC).
Off—All power is switched off. Ignition is low, but Vin remains connected. Current
draw is 5 mW (400 µA @ 12 VDC).
www.sierrawireless.com/ALMS
11
Introduction to the AirLink RV55
or contact your Sierra Wire-
41113042