Step 2-Mounting The Rv55 Router; Mounting Brackets; Flat Surface Mount - Sierra Wireless AirLink RV55 Hardware User's Manual

Step 2—Mounting the RV55 Router
Warning:
8 inches (20 cm) away from the operator.
Mount the router where:
•
•
•
•
•
•

Mounting Brackets

The RV55 router comes with mounting screws. An optional DIN rail mounting bracket (P/N
6000659) is available from Sierra Wireless.

Flat Surface Mount

If you are mounting the RV55 router on a flat surface, use the mounting screws that come
with the router.
Use this unpainted mounting
hole to ground the RV55.
Note: RV55 Wi-Fi model shown.
Mounting hole measurements are
the same for all RV55 models.
Figure 2-2: RV55 Router Mounting Hole Locations and Dimensions
Rev. 1 June 2019
This router is not intended for use close to the human body. Antennas should be at least
There is easy access to the cables
Cables are not bent, constricted, close to high amperages or exposed to extreme
temperatures
The front panel LEDs are easily visible
There is adequate airflow
It is away from direct exposure to the elements, such as sun, rain, dust, etc.
It will not be hit or come into contact with people, cargo, tools, equipment, etc.
6.5 mm
55 mm
85 mm
119 mm
106 mm
Mounting holes 5.5 mm in diameter
17
Installation and Startup
28 mm
41113042