Din Rail Mount - Sierra Wireless AirLink RV55 Hardware User's Manual

AirLink RV55 Hardware User Guide

DIN Rail Mount

If you are mounting the RV55 router on a DIN rail, order DIN rail mounting bracket kit (P/N
6000659) from Sierra Wireless. The kit contains:
•
•
•
Figure 2-3: DIN Rail Mounting Bracket
To attach the RV55 router to a horizontally mounted DIN rail, in a variety of orientations:
1. Install the SIM card. (See
2. Test the network connectivity.
3. Place the router on the DIN rail mounting bracket, lining up the mounting holes on the
4. Use the screws provided to attach the router to the bracket. Torque the screws to a
5. Use the screws provided to attach the DIN rail clip to the bracket.
6. Attach the DIN rail clip to a horizontal DIN rail, with the spring clip at the bottom,
Note: The DIN rail mounting bracket and clip in the Sierra Wireless kit should only be used on
horizontally-mounted DIN rail.
Rev. 1 June 2019
L-shaped DIN Rail Mounting Bracket—Qty 1
DIN Rail Clip (35 mm EN 50022)—Qty 1
Screws
Connect the RV55 router. Power it up and ensure that you have network connectivity.
(See Step 5—Connect the Power
underside of the router with the holes on the DIN rail mounting bracket.
maximum of 1.1 N-m (10 in-lb.).
taking into account the location information described in
Scenarios on page 13.
Step 1—Insert the SIM Cards
on page 24.)
18
on page 16.)
Power Consumption
41113042