Recovery Mode - Sierra Wireless AirLink RV55 Hardware User's Manual

AirLink RV55 Hardware User Guide

Recovery Mode

If the router fails to boot properly, it automatically enters recovery mode, or, if the router is
unresponsive to ACEmanager input and AT commands, you can manually put the router
into recovery mode.
Recovery mode enables you to update the ALEOS software and return the router to
working order. (For details, refer to the ALEOS Software Configuration User Guide—
Configuring your router chapter.)
To enter Recovery mode manually:
•
To recover the router:
•
Note: After the recovery, you need to reload the radio module firmware store and templates.
To exit Recovery mode, if it has been inadvertently entered, do one of the following:
•
•
•
For more information, refer to the ALEOS Software Configuration User Guide (Configuring
your router chapter).
Rev. 1 June 2019
On the router, press the Reset button for more than 20 seconds. (Release the button
when the Power LED flashes amber.)
Update ALEOS using the Recovery mode interface. Once the new ALEOS version is
successfully uploaded and installed, the router reboots and exits recovery mode.
When the process is complete, the ACEmanager login screen appears.
Press the reset button on the router to reboot it.
Click the Reboot button on the Recovery screen.
Wait 10 minutes. If no action is taken within 10 minutes of the device entering
Recovery mode (for example, if the Recovery screen has not been loaded by the web
browser), it automatically reboots and exits Recovery mode.
40 41113042