Returning Your Test Set For Service; Calling Keysight Technologies - Keysight Technologies E7515B UXM 5G Getting Started Manual

Troubleshooting

Returning Your Test Set for Service

Returning Your Test Set for Service

Calling Keysight Technologies

Keysight Technologies has offices around the world to provide you with
complete support for your wireless test set. To obtain servicing information, or
to order replacement parts, contact the nearest Keysight Technologies office
listed under
correspondence or telephone conversations, refer to your test set by its
product number, full serial number, and software revision.
To access your product information, select the Info icon
Control Panel view after switching to the E7515B Control Panel via the
Application Switch tool or after performing both or only the second action
described below:
1. To access the Windows task bar from inside the TA/LA software
2. Once you have access to the windows task bar, double-click the E7515B
Getting Started Guide
"Locations for Keysight Technologies" on page
application, you can use the Application Switch tool to switch to the
desktop and find the task bar, or you can connect the USB keyboard to the
UXM 5G using one of the USB ports located on the front and rear panels of
the UXM 5G. Press the key showing the windows icon
usually located in the lower-left corner of the keyboard.
Control Panel icon to maximize the E7515B Control Panel view.
108. In any
in the E7515B
, which is
107