Interfaces Of The Linear Translator Module; Analog Input - RAYLASE AXIALSCAN Manual

Chapter 4
4.6
4.6.1
The terminal assignment of the analog interface is outlined below. To determine whether the
deflection unit is fitted with an analog or a digital interface, refer to the code on the rating plate
( page 15, Rating plate code).
1
13
25 PIN D-SUB
nu = not used
Fig. 13 To prevent errors, shielded cables should be used and signals must be input as shown below.
Signal input
28 RAYLASE 3-Axis Subsystems for Laser Beam Deflection

Interfaces of the linear translator module

For subsystems with analog interface only

Analog input

PIN Signal
1 GND
2 GND
3 GND
14
4 GND
5 nu
6 GND
25
7 GND
8 GND
9 GND
10 GND
11 /Z Ready
12 GND
13 GND
Functional description
PIN Signal
14 nu
15 nu
16 nu
17 nu
18 nu
19 nu
20 -Z Command
21 +Z Command
22 Z Position
23 /Z Temp-ok
24 /Z Pos-Error
25 Z Velocity
--- ---
MN025 / v2.1.0