Chapter 4
4.4
Fig. 10
Protection win-
dow
1 Mount
2 Protection window
Installation instructions
o Before installation, check the protection window for dirt, scratches or cracks.
-
-
o Screw the protection window and mount into the beam output on the deflection unit until it
is positioned securely.
26
RAYLASE 3-Axis Subsystems for Laser Beam Deflection
For subsystems fitted with a protection window only
Protection window
If the protection window is dirty, it must be cleaned ( page 49, Instructions for
cleaning lenses and protective glasses).
If the protection window is scratched or cracked, it must be replaced.
3 Clamp ring
4 Protective cap
Functional description
MN025 / v2.1.0