Module Overview - RAYLASE AXIALSCAN Manual

Basic information
2.4

Module overview

The illustration below shows three typical digital laser devices that are equipped with
RAYLASE and customer-specific (indicated by dotted lines) modules.
Analog subsystems are controlled by using an analog current or voltage interface provided by
the customer.
RAYLASE SP-ICE control car d
or
RAYLASE RLC-PCI control car d
Driver for R AYLASE control card s
Software:
RAYLASE weldMARK
or
RAYLASE RLScrib e
or
customer-specific software
PC
USB port
Driver for R AYLASE control card s
Software:
RAYLASE weldMAR K
or
RAYLASE RLScrib e
or
customer-specific software
PC
RS232
Driver for RAYLASE control cards
Software:
RAYLASE weldMARK
or
RAYLASE RLScribe
or
customer-specific software
PC
MN025 / v2.1.0
Power Supply
RAYLASE
RLC-USB unit
Power Supply
RAYLASE
SP-ICE control card
Stand-alone hardware
Power Power
supply supply
(5V)
3-Axis Subsystems for Laser Beam Deflection
Laser System
RAYLASE RAYLASE
Linear translator Deflection unit
module
Subsy stem
Laser system
RAYLASE RAYLASE
Linear translator Deflection unit
module
Subsy stem
Laser system
RAYLASE RAYLASE
Linear translator Deflection unit
module
Subsystem
Chapter 2
Fig. 2
Module overview
11