Entering Asset Data - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

connectivity module to the motor on which it is mounted. In step "Enter asset data" (Page 25),
select between the following options:
● Motor assignment by manually entering the serial number
Manually enter the motor serial number in the "SIDRIVE IQ Config" application during the
onboarding process. Based on the serial number, the electrical parameters of the motor are
copied out of the digital twin saved in the Cloud and transferred into the connectivity module.
● Motor assignment using the motor data matrix code
If the motor is equipped with a scannable code, you can identify the motor to which you have
local access. The serial number is read out by scanning it. Scan the motor data matrix code
by tapping on
6.7.3

Entering asset data

Once you have started the onboarding process, you must complete the associated asset data.
The MindSphere URL and the path for registration are already preset as default setting.
The following diagram shows the dialog to enter asset data:
SIMOTICS CONNECT 400
Operating Instructions, 07/2019
6.7 Onboarding process using the "SIDRIVE IQ Config" application
.
Commissioning
25