Restoring Factory Settings And Resetting User Data - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

The connectivity module automatically restarts after the firmware has been successfully
updated. The Bluetooth connection to the mobile device is reset. In rare cases it is possible that
an error message is displayed on the mobile device: for example, "BLE error".
8.2

Restoring factory settings and resetting user data

You can find the most important basic functions of the connectivity module in the "SIMOTICS
CONNECT" menu of the "SIDRIVE IQ Config" application.
An overview of all of the basic functions is shown in the following table:
Function
Identification
Restart
Starting MindSphere
synchronization
Onboarding
SIMOTICS CONNECT 400
Operating Instructions, 07/2019
Description
Helps you to visually identify the currently connected connectivity module. The connectivity module
LED flashes for five seconds.
The connectivity module restarts. The connectivity module is disconnected. Measurement data that
have still not been transferred to SIDRIVE IQ are lost. To avoid losing any data, before you restart
the connectivity module, run the "Start MindSphere synchronization" function.
This starts transferring measurement data from the connectivity module memory to SIDRIVE IQ.
Starts the onboarding process to SIDRIVE IQ.
8.2 Restoring factory settings and resetting user data
Maintenance
37