Onboarding Process Using The "Sidrive Iq Config" Application - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

Procedure
1. Select the "Settings" menu.
2. Select submenu "WI-FI". The current settings are shown in submenu "WI-FI", and provide
you the option of selecting other Wi-Fi settings.
3. Configure the WI-FI settings:
– Activate the "Manual input" option to manually set the SSID network.
– Activate the "Select visible networks" option to select the required network from the list
4. Enter the WLAN password. The WLAN password must not exceed a maximum length of 32
characters.
5. Confirm your entries by clicking on "Send".
6.7

Onboarding process using the "SIDRIVE IQ Config" application

Onboarding involves the connection and registration process, with all of its associated settings,
from the connectivity module to SIDRIVE IQ Fleet.
SIMOTICS CONNECT 400
Operating Instructions, 07/2019
6.7 Onboarding process using the "SIDRIVE IQ Config" application
of visible networks. A list of all of the detected WLAN networks is displayed in the
selection menu.
Commissioning
23