Handling; Transport; Packaging - Beckhoff XTS Startup Manual

4

Handling

4.1

Transport

• The XTS starter kit may only be transported by qualified personnel and in the manufacturer's original

packaging.

• Avoid shocks, particularly at the corners of the packaging.
• If the packaging is damaged, check the XTS starter kit for visible damage. Inform the transport
company and, if necessary, the manufacturer.
Damage to the device due to improper transport!
When transporting the XTS starter kit ensure that all specifications are met. In particular,
jerky and fast movements should be avoided.
CAUTION
4.2 Packaging
• Motor modules in recyclable cardboard packaging*
• Magnet holders in recyclable cardboard packaging with foam inserts*
• Movers in recyclable cardboard packaging with bubble wrap*
*only single packaging.
Shipping of the XTS starter kit
eXtended Transport System Start-Up
Contents of the Starter Kit include
• Fully Assembled and tested XTS (item 4)
• Control Cabinet with all necessary equipment
(item 3)
Both are secured in the shipping crate to prevent
movement during transport.
Warning Pinch Point!
When opening/closing the case keep hands clear of
the area between the lid of the crate (1) and the side
of the crate (2) two People are required to lift/lower
the lid!
Version: 1.2
Handling
11