Preparing The Measurement - Beurer BM 54 Instructions For Use Manual

System requirements for the "beurer Health Manager" app
– iOS ≥ 9.0 / Android ≥ 5.0
TM
– Bluetooth ≥ 4.0
®
List of compatible devices:

4. Preparing the measurement

Inserting the batteries
• Remove the battery compartment lid
on the rear of the device.
• Insert four 1.5 V AAA (alkaline type
LR03) batteries. Make sure that the
batteries are inserted the correct
way round. Do not use rechargeable
batteries.
• Close the battery compartment lid
again carefully.
All display elements are briefly displayed,
in the display. Now set the date and time as described below.
If the battery replacement symbol
played, you can no longer perform any measurements and must
replace all batteries. Once the batteries have been removed from
the device, the date and time must be set again. Any saved
measured values are retained.
• The empty, completely discharged batteries must be disposed of
• The codes below are printed on batteries
Set the hour format, date, time and Bluetooth
The following section describes the functions and settings avail-
able on the blood pressure monitor.
It is essential to set the correct date and time. Otherwise, you will
not be able to save your measured values correctly with a date
4 x 1,5V AAA
and time and access them again later.
or flashes
Press and hold the START/STOP button
is permanently dis-
23
Battery disposal
through specially designated collection boxes, recycling points
or electronics retailers. You are legally required to dispose of the
batteries.
containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury
Hour format Date
➔
If you press and hold the M1 or M2 memory button, you can
set the values more quickly.
The hour format now flashes on the display.
• Select the desired hour format using the M1/
M2 memory buttons and confirm with the
START/STOP button
settings
®
Time ➔ Bluetooth
➔
for 5 seconds.
.
®