Evaluating Results - Beurer BM 54 Instructions For Use Manual

• Press the START/STOP button
pressure monitor. The measurement is then stored in the
selected user memory.
• If the device is not switched off manually, it will switch
off automatically after 30 seconds.
If Bluetooth ® data transfer is activated, data is transferred
to the "beurer HealthManager" app after confirming the us-
er memory with the START/STOP button
"Transferring measured values").
When connecting for the first time, a randomly-gene-
rated six-digit PIN code is displayed on device, and at
the same time an input field appears on the smartphone
in which you must enter this six-digit PIN code. After
successfully entering the code, the device will be con-
nected to your smartphone.
• The Bluetooth symbol on the display flashes and the
®
blue LED lights up. The blood pressure monitor now at-
tempts to connect to the app for approx. 30 seconds.
• The Bluetooth symbol stops flashing as soon as a con-
®
nection is established. All measurement data is automat-
ically transferred to the app. Once the data has been
successfully transferred, the device switches off. If the
data transfer was unsuccessful, the blue LED goes out
and " " appears on the display.
• If a connection to the app cannot be established after
30 seconds, the Bluetooth
blood pressure monitor switches off automatically after
3 minutes.
to switch off the blood
(see chapter 8
symbol goes out and the
®
Please note that you must add the blood pressure mon-
itor to "My devices" in the "beurer HealthManager" app
to enable data transfer. The "beurer HealthManager"
app must be activated to allow data transfer. If the latest
data is not displayed on your smartphone, repeat the
data transfer as described in chapter 8.
If you forget to turn off the blood pressure monitor, it will
switch off automatically after approx. 30 seconds. In this
case too, the value is stored in the selected or most recently
used user memory and the data is transferred if Bluetooth
data transfer is activated.
• Wait at least 5 minutes before taking an-
other measurement.

6. Evaluating results

Cardiac arrhythmia:
This device can identify potential disruptions of the heart rhythm
when measuring and if necessary, indicates this after the meas-
urement with the symbol
This can be an indicator for arrhythmia. Arrhythmia is a condition
in which the heart rhythm is abnormal because of flaws in the
bioelectrical system that regulates the heartbeat. The symptoms
(skipped or premature heart beats, pulse being slow or too fast)
can be caused by factors such as heart disease, age, physical
make-up, excess stimulants, stress or lack of sleep. Arrhythmia
can only be determined through an examination by your doctor.
If the symbol is shown on the display after the measurement
has been taken, repeat the measurement. Please ensure that you
26
.
®