Snoot Installation - Elation FUZE PROFILE CW User Manual

S N O O T I N S T A L L A T I O N
4-Ø3.5mm [Ø0.14in]
Ø148mm [Ø5.83in]
snoot
Ø136mm [Ø5.35in]
1. Place fixture on the stable flat surface and let cool for 15mins.
2. Align snoot onto front lens so screw holes on snoot match screw holes on lens.
3. Carefully using a hand screwdriver, secure included 4 screws.
4. Check Snoot to confirm it is seated properly and all 4 screws are secure.
DO NOT OVER TIGHTEN SCREWS! DO NOT USE A POWER SCREWDRIVER!
16