Front View Of The Left And Right Control Panels; Control Panel - Dell EMC PowerProtect X400 Hardware Configuration And Installation Manual

Hardware specifications
Item Indicator or button
1 Left control panel
2 Right control panel
3 Power-on indicator or system state
indicator or power button for sleds 1
and 3
4 System identification button for
sleds 1 and 3
5 Power-on indicator or system state
indicator or power button for sleds 2
and 4
6 System identification button for
sleds 2 and 4
PowerProtect X400 Appliance Hardware Configuration and Installation Guide
16
Figure 3 Front view of the left and right control panels
Table 3 Control panel
Icon
-
-
Description
The power-on indicator and system identification LED for sleds 1
and 2 are located on the left control panel.
shows the location of sleds 1 and 2 on the back of the X400
platform cube.
The power-on indicator and system identification LED for sleds 3
and 4 are located on the right control panel.
shows the location of sleds 3 and 4 on the back of the X400
platform cube.
Press the power button to turn the sled on or off.
The power-on indicator turns amber when a critical system event
occurs.
Press the system ID button:
To locate a particular sled within the enclosure.
l
To turn the system ID on or off.
l
Press the power button to turn the sled on or off.
The power-on indicator turns amber when a critical system event
occurs.
Press the system ID button:
To locate a particular sled within the enclosure.
l
When the system ID button is pressed, the system
identification indicator
(see Figure 7 on page 19)
To turn the system ID on or off.
l
Figure 6 on page 18
Figure 6 on page 18
on the back of the sled lights up.