Right Control Panel View - Dell EMC VxRail E Series Owner's Manual

Item 3 indicates solid amber where the condition indicates that the appliance is in fail-safe mode. If
the problem persists, see the Getting help section. Item 4 indicates blinking amber where the
condition indicates that the appliance is experiencing a fault. Check the Appliance Event Log or the
LCD panel, if available on the bezel, for specific error message. For more information about error
messages, see the
openmanagemanuals > OpenManage software.
Table 4 Appliance health and appliance ID indicator codes
Appliance health and appliance ID
indicator code
Solid blue
Blinking blue
Solid amber
Blinking amber

Right control panel view

Figure 4 Right control panel view
The table below describes the right control panel features
Dell Event and Error Messages Reference Guide at Dell.com/
Condition
Indicates that the appliance is turned on,
appliance is healthy, and appliance ID mode is
not active. Press the appliance health and
appliance ID button to switch to appliance ID
mode.
Indicates that the appliance ID mode is active.
Press the appliance health and appliance ID
button to switch to appliance health mode.
Indicates that the appliance is in fail-safe mode.
If the problem persists, see the
section.
Indicates that the appliance is experiencing a
fault. Check the Appliance Event Log or the
LCD panel, if available on the bezel, for specific
error message. For more information about
error messages, see the
Messages Reference Guide at Dell.com/
openmanagemanuals > OpenManage software.
Dell EMC VxRail Appliances on PowerEdge Servers E Series Owner's Manual
Getting help
Dell Event and Error
Overview
9