Rotax 912 Series Maintenance Manual page 45

Inspection items
2.2.7) Oil change
a) Remove oil drain screw from oil tank.
Drain old oil and dispose as per environmental
regulations.
See Chapter 12-00-00, para 5.2
b) Remove oil filter from engine and install new oil filter.
Lubricate mating sealing ring of new oil filter with
engine oil. Screw on new filter by hand.
After the engine test run, tighten again by hand.
See Chapter 12-00-00, para 5.3
c) Cut oil filter housing without producing any metal chips
and inspect filter mat.
Findings: _________________________________
_________________________________________
See Chapter 12-00-00, para 5.3
d) Replace gasket ring of drain screw on oil tank.
See Chapter 12-00-00, para 5.2
e) Refill oil tank with approx. 3 litres of oil.
For oil quality refer to OM and SI-18-1997
See Chapter 12-00-00, para 5.2
(1
for engine operation with AVGAS and/or
severe operating condition.
See SI-18-1997.
Effectivity: 912 Series
AIRCRAFT ENGINES
MAINTENANCE MANUAL
page 6 of 10
Check (hr.)
25 50 100 200 600
(1
X X X X X
(1
X X X X X
X X (1 X X X
X X (1 X X X
(1
X X X X X
05-20-00
Rev. 1, Jan. 01/2002
04629
Signature
page 9