Rotax 912 Series Maintenance Manual page 29

5 899 785
6 297 433
7 897 511
8 897 330
Effectivity: 912 Series
AIRCRAFT ENGINES
MAINTENANCE MANUAL
Its surface sealing properties are guaranteed for temperature
range between -55°C and +200°C (-67°F to + 390°F). No
corrosion is allowed in the sealing gap.
LOCTITE 221 violet,
medium-duty screw securing agent ............................ 10 cm
Medium duty adhesive or screw securing agent suitable for
materials of different properties. In case of strain, the stress
is distributed evenly over the whole surface of the connec-
tion. The adhesive connection creates hermetic sealing for
gas and other liquids. This sealing property protects the
parts from corrosion.
LOCTITE 221 is suitable for screws and nuts up to M12
threads and for low duty connections.
MOLYKOTE G-N,
Lubricant ...................................................................... 100 g
Is used on highly loaded bearing positions as initial lubrica-
tion and at press fits for preventation of fretting corrosion.
MOLYKOTE GN is applied to both components mated. Its
use is specifically mentioned in the relevant Manual.
LOCTITE 380 black,
Adhesive medium-duty .................................................. 20 g
Adhesive suitable for materials of different properties. Suit-
able for medium duty connections. Its cure time depending
on the materials is max. 12 hours and it resists temperatures
from -55°C (-67°F) up to +150°C (+300°F).
Lithium grease,
To avoid leakage current ............................................. 250 g
Is used on all electrical connections, to avoid current leak-
age. After assembly is complete, apply Lithium grease to the
connection as anti-corrosive.
3
05-00-00
page 9
Initial issue, Sept. 01/98