Rotax 912 Series Maintenance Manual page 30

9 897 870
10 297 368
11 897 186
12 n.a.
13 n.a.
14 n.a.
Effectivity: 912 Series
AIRCRAFT ENGINES
MAINTENANCE MANUAL
K&N Filter oil 99 - 1131,
Bag ............................................................................... 58 ml
To optimize filtration and to protect against moisture.
SILASTIC 732
multi purpose, one component sealing compound on silicon
base ............................................................................ 310 ml
Especially suitable for maintenance and repair. Vulcanizes
at room temperature to a viscous rubber mass and is resist-
ant against chemicals. To be applied only on a clean, dry
and grease-free surface.
SILICONE HEAT CONDUCTIVITY PASTE ............... 150 g
Application of the heat conductivity paste will reduce heat
transfer resistance. With the grease-like, temperature resist-
ant silicone compound free space between component and
cooling item (e.g. spark plug - cylinder head) will be filled,
thus improving heat transfer.
Multi-purpose grease LZ ....................................................
Generally useable, neutrally coloured multipurpose grease,
water resistant and highly adherent. Useable for tempera-
tures from -35°C to +120°C (-31°F to +248°F). The grease
resists to mechanical load.
Preservation oil, MobilArma 524 ........................................
Water insoluble preservation oil on hydro carbon base with
additives. The pour point is below -18°C (-3°F).
Lapping fleece SR 4600 A - very fine grading ..................
Is sold by the meter and used for manual removal of smaller
rust spots or oxidation, especially for optimum ground con-
nections. It is most appropriate to remove LOCTITE from
surfaces or threads to make them metallic clean. Before
reapplying LOCTITE, clean surfaces with nitro-thinner or
degreasing agent (CASTROL ZA 30 or OMV-SOFT SOL).
When using solvents, mind the safety regulations for per-
sons and environment.
05-00-00
page 10
Initial issue, Sept. 01/98