Industrial Electronic Devices
UPDATE DEVICE USB:
By pressing the
"Update Device
necessary, using the USB port.
In order to load the parameters or update the firmware in the device, follow these
instructions:
Connect the USB cable from your PC to the Converter;
Select the
"COM
port";
Select which operations you want to do.
Press the
"Execute update
When all the operations are "OK", disconnect the USB cable;
ADFweb.com Srl – IT31010 – Mareno – Treviso
USB" button it is possible to load the created Configuration into the device, and also the Firmware if is
firmware" button to start the upload;
Figure 9: Update device procedure.
User Manual J1939 / Modbus Master
Document code: MN67431_ENG
Revision 1.101
Figure 10: "Update Device" windows
INFO:
www.adfweb.com
Phone +39.0438.30.91.31
Page 23 of 32