Update Device - ADF Web HD67431 Series User Manual

Industrial Electronic Devices
UPDATE DEVICE (ONLY FOR THE HARDWARE WITHOUT USB PORT):
By pressing the "Update Device" button it is possible to load the created Configuration into the device; and also the Firmware, if is
necessary.
In order to load the parameters or update the firmware in the Converter, follow these instructions:
Connect the AC67400 to the PC;
Connect the CAN port of AC67400 to CAN port of HD67431;
Feed the HD67431;
Turn on the device;
Select the "COM port" and press the "Connect" button;
Press the "Next" button;
Select which operations you want to do.
Press the "Execute update
When all the operations are "OK" turn OFF the device;
Disconnect the AC67400;
Turn on the device.
At this point the configuration/firmware on the device is correctly update.
Figure 9: "Update Device" windows
ADFweb.com Srl – IT31010 – Mareno – Treviso
firmware" button to start the upload;
User Manual J1939 / Modbus Master
Document code: MN67431_ENG Revision 1.101
INFO: www.adfweb.com Phone +39.0438.30.91.31
Page 22 of 32