Introduction; Unpacking And Components Diagrams - Accu-Scope EXC-400 Manual

Hide thumbs Also See for EXC-400:

Table of Contents

EXC-400 MICROSCOPE SERIES

INTRODUCTION

Congratulations on the purchase of your new ACCU-SCOPE

microscope. ACCU-SCOPE

microscopes are engineered and manufactured to the highest quality standards. Your microscope will

last a lifetime if used and maintained properly. ACCU-SCOPE

microscopes are carefully assembled,

inspected and tested by our staff of trained technicians in our New York facility. Careful quality control

procedures ensure each microscope is of the highest quality prior to shipment.

UNPACKING AND COMPONENTS

Your microscope arrived packed in a molded Styrofoam container. Do not discard the container: the

Styrofoam container should be retained for reshipment of your microscope if needed. Avoid placing the

microscope in dusty surroundings or in high temperature or humid areas as mold and mildew will form.

Carefully remove the microscope from the Styrofoam container by the recessed hand grip area on the

back of the microscope and base, and place the microscope on a flat, vibration-free surface.

ACCU-SCOPE

73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com

Table of Contents