Wire Door Lock - Overhead door INFINITY 2000 Installation, Programming, Operating Manual

4

Wire Door Lock

1. Plug door lock harness into the LOCK plug on bottom of opener. Insert plug in correct direction
2. Run wire down the wall to the DOOR LOCK and secure with supplied wire staples. NOTE that DOOR LOCK
wires are polarity sensitive.
3. Cut off excess wire, strip 1/4" of insulation and attach to bottom connectors on DOOR LOCK.
4. Install WHITE wire to W terminal and STRIPED wire to B/W terminal.
ALL WIRE CONNECTIONS LOCATED AT BOTTOM OF OPENER
WIRE THE OPENER
Door Lock Plug
Door Lock Wire Connections
(SEE INSET)
11