Specification; Specifications - SMC Networks PSE575 Operation Manual

Specification

■Specifications

Model
Rated pressure range
Pressure
spec.
Withstand pressure
Temperature characteristics
Model
Fluid Applicable
Power supply voltage
Electrical
Current consumption
spec.
Protection
Analogue
Output type
output
Analogue output Accuracy
(Ambient temperature at 25
Linearity
Repeatability
Enclosure
Withstand voltage
Insulation resistance
Environ
Operating
mental
temperature range
Operating humidity
range
Standard
Lead wire and M12 connector
○Piping specifications
Model
Port size
Materials of parts in contact with
fluid
Without lead wire
and M12 connector
Weight
With lead wire and
M12 connector
○Cable specifications
Nominal cross
section area
Conductor
Outside diameter
Material
Insulator Outside diameter
Colours
Sheath Material
Finished outside diameter
PSE575
0 to 2 MPa
5 MPa
PSE57□-02
Gas or liquid that will not attack or corrode the materials of parts in contact with fluid
12 to 24 VDC±10% with 10% voltage ripple or less
Analogue output: 1 to 5 V
Output impedance: Approx. 1 kΩ
o
C)
500 VAC, 1 minute, Between lead block and case
100 MΩ or more (at 500 VDC) Between lead block and case
Operation: -10 to 60
Operation, Storage: 35 to 85%RH (No condensation)
Piping port: C3604 + electroless nickel plated
Pressure sensor: Al
Square ring: FKM
AWG23
0.72 mm
Cross linked vinyl chloride
1.14 mm
Brown, Blue, Black, White
Oil resistant vinyl chloride
4
PSE576
0 to 5 MPa
12.5 MPa
o
±5%F.S. (at 25
10 mA or less
Protected against inverse connection
Analogue output: 4 to 20 mA
Maximum load impedance:
±2.5%F.S.
±0.5%F.S.
±0.5%F.S. (at 25
IP65
o o
C, Storage: -20 to 70 C (No condensation or freezing)
CE, RoHS
3 m
02
R1/4, M5 x 0.8
o (aluminum oxide)
2 3
103 g
191 g
-13-
PSE577
0 to 10 MPa
30 MPa
C)
PSE57□-02-28
500 Ω or less (at 24 VDC)
100 Ω or less (at 12 VDC)
o
C)
No.PS※※-OMT0006-B