Installing The 3102 Telephone Label Plate - 3Com 3500 Manual

Figure 12 Underside of the VCX 3102 Business Telephone
6
CAUTION: The VCX system operates over the LAN, not through traditional telephone
wiring. Your telephone connects to the VCX system through an RJ-45 LAN connector
instead of an RJ-11 telephone connector. Your telephone will not work unless it is
connected properly. Ask your administrator if you have questions about your
telephone connection.
The underside of an VCX telephone or attendant console includes:
1 AC power adapter connection
2 Ethernet connector for connection to the LAN
3 Ethernet connector for an optional connection to your desktop computer.
4 Handset connector
5 Headset connector (3102 and 3103 only)
6 Tabs for the support bracket
For information about the underside of each VCX Telephone, and for information
about how to connect any VCX Telephone or Attendant Console to a Power over
Ethernet source, see the packing sheet that comes with the device.
Strain relief clamps are built into the 3101/3102/3105 support bracket.

Installing the 3102 Telephone Label Plate

The VCX 3102 Business Telephone has a label plate with localized button labels that
you must install. Once you snap the plate onto the telephone, you cannot remove it.
To install the plate, slip the tabs along the top edge of the plate into the slots on the
telephone, and then press firmly along the bottom edge of the plate until you feel it snap
into place.
Figure 13 VCX 3102 Label Plate
1 2 3 4
5
85