Related Documentation; Comments - 3Com 3500 Manual

No. Button/Control
Message Waiting
2
Indicator(MWI)
3 Display Panel
4 Menu button
5 Navigation buttons
6 Voicemail button
7 Call Transfer button
8 Conference button
9 Redial button
10 Hold button
11 Number pad
Headset switch
12
button
13 Speaker button
14 Up volume button
15 Mute button
Description
soft buttons.
The MWI LED lights up when there are unread
messages in the voice mailbox, and blinks
when an incoming call is present.
The Display Panel displays the telephone state
and call information.
Press the Menu button to enter the
configuration menu of the telephone, or exit the
menu and return to the standby interface.
The navigation buttons include four direction
buttons and one select button. You can use the
navigation buttons to select menu items in the
configuration menu, or switch between lines
when multiple calls are present.
Press this button to directly access the voice
mailbox and listen to voice messages.
Use this button to forward calls. To forward the
current call to a third party, press the Call
Transfer button, dial the number of the third
party, and press the Call Transfer button
again.
Use this button to establish a multi-party
conference call. While on a call, press the
Conference button, dial the number of the
person you want to conference in, and then
press the Conference button again to start a
3-party conference. To conference more
people in, repeat this step.
Press this button to redial the last telephone
number or extension that you called.
While on a call, you can press the Hold button
to put the current call on hold. If the
administrator has configured the Music on Hold
(MOH) service, the person on hold will hear
music while he or she waits; if not, he or she
will not hear anything.
The number pad has twelve buttons: 0, 1, 2, 3,
4, 5, 6, 7, 8, 9, *, and #. Press the number
buttons to enter the number of the person you
want to call.
Press the headset switch button to switch
between the handset and a headset. The
backlight of the button is on when a headset is
used. If you choose the headset mode, you
need to speak through the headset after the
call is put through.
Press the Speaker button to use the
speakerphone mode. In this mode, you can
hear the caller on the speaker, and speak
through a microphone.
Press this button to raise the volume of the ring
while your telephone is ringing, raise the voice
level of the callers while talking through the
handset, or raise the volume of the speaker
while in speakerphone mode.
While on a call, you can press the Mute button
to prevent callers from hearing you. When the
7