3Com 3500 Manual page 73

System Speed Dials — Allows you to view the system-wide speed dial numbers
configured on your system by your administrator. You cannot add, modify, or
delete a system speed dial number. However, you can export the list to a
Microsoft Excel spreadsheet. You can also map a system speed dial number to a
button on your telephone (see
User Interface). See Dialing System Speed Dial Numbers.
Call Forwarding —Allows you to control how the VCX system handles your calls
when you do not answer a call, your extension is busy, or your calls are forwarded
to another extension. See
Selective Ringing — Enables you to configure Selective Ringing for calls coming
in from up to 10 telephone numbers. For each number, you can select one of 9
tones and for each tone you can choose to have the telephone ring once, twice, or
three times.
You can silence the ringer and only allow the telephone to flash by selecting
in the Ring Tone drop down list. You can also delay the ring of a
Ringer Disabled
bridged line telephone or hunt group extension for a specified number of seconds.
If you configure a selective ring pattern for a telephone extension of a configured
bridged line or a hunt group, that extension appears in the Hunt/ACD Group and
Bridged Calls list. When an extension appears in this list, you can then change
the delay time.
Privacy — Allows you to control whether the VCX system sends your Caller ID
when you make a call. See
Call Restrictions — Allows you to block incoming and outgoing calls that match
specified patterns.
Call Coverage
Call Coverage — Allows you to set your default call coverage point. The
configured call coverage point determines the destination of a call that is either
not answered in time, or cannot be answered because the destination is busy or
unreachable (logged out, or disconnected from the network). The default
destination for unanswered calls is voice mail. See
Point.
Predefined Rule — A Predefined Rule allows you to create a rule from a
specified list of predefined call coverage values defined by the Administrator.
User Rule — A User Rule allows you to configure personal rules to conform to
your schedule.
Groups
Hunt Groups — Allows you to view the hunt groups you belong to and your
current login status for each group. See
Page Groups — Allows you to view the page groups configured on your system.
When you dial the group page extension, speakers are activated on the
telephones that are members of the group. As you speak into your handset, your
voice is broadcast on the activated speakers. See
Call Pickup Groups — Allows you to view the call pickup groups you belong to
and the other members of these call pickup groups. See
Log Out — Ends your VCX User Interface session. See
IP Messaging — Provides a link to the IP Messaging page, that is, allows you to log
in to the mailbox of the telephone number displayed on the right.
Assigning Access Button Functions Using the VCX
Enabling Call Forwarding
Controlling Caller ID.
Hunt Groups.
70
for additional information.
Configuring a Call Coverage
Paging.
Call Pickup.
Logging Out.