Keypad And Display; Programming Keys; Control Keys - Johnson Controls VFD66 Drive User Manual

6

Keypad and display

The keypad and display are used for the following:
• Displaying the operating status of the drive
• Displaying a fault or trip code
• Reading and changing parameter values
• Stopping, starting and resetting the drive
Figure 6-1 Keypad and display
6.1

Programming keys

The MODE key is used to change the mode of operation of the drive.
M
The UP and
manual input mode, they are used to increase and decrease the speed of the motor.
6.2

Control keys

The START key is used to start the drive in manual input mode.
The STOP/RESET key is used to stop and reset the drive.
VFD66 User Guide
Issue Number: 2
DOWN keys are used to select parameters and edit their values. In
www.johnsoncontrols.com
23