Fault Clearing; Repairs And Replacements - Johnson Controls VFD66 Drive User Manual

8.1

Fault clearing

Drive faults may be cleared by one of the following methods:
• Removing and re-applying power to the drive.
• Pressing the stop/reset button on the keypad.
8.2

Repairs and replacements

Field repairs of the VFD66 Control should not be made. In case of a defective or
improperly functioning control, contact your nearest Authorized Johnson Controls/
PENN® Distributor or Sales Representative. When contacting your Johnson Controls/
PENN distributor, have the model number of the control available. This number can be
found on the label on the side of the control.
VFD66 User Guide
Issue Number: 2 www.johnsoncontrols.com
37