Bosch FPA-5000 Product Information page 32

32 en | Product Description
A total of 22 permanent membrane keys (B) on the right-hand, upper and lower edges of the
operating panel and variably located virtual keys within the touch display area enable
convenient operation and message processing.
All incoming messages and events are saved internally and can be viewed on the display at any
time. A log printer for printing incoming messages can be connected.
There is a key switch (D) underneath the left status LEDs that has two programmable switch
positions, e.g.:
–
–
Alarm indication
11 LEDs (C) provide ongoing information about the operational status of the panel or system.
Additional LED display modules each with 16 red and yellow LEDs can be used for visual
status display (e.g. alarm or fault indication).
Configuration
On the rear of the panel controller, there are three rotary switches for addressing in a panel
network and six DIP switches for configuration settings.
The FSP-5000-RPS Programming Software facilitates easy adaptation to country-specific
circumstances.
Interfaces
Up to 32 panel controllers and/or remote operating panels can be combined as required to
form a network using the integral CAN interfaces.
For details about networking, see Section 1.18 Networking, page 51 and
Section 3.13 Networking rules, page 70.
Two signal inputs (IN1/IN2) and three additional connections (Ethernet, USB, RS232) are also
available.
Technical specifications
LCD display/touch screen
Operating and display elements
Interfaces
Permissible length of CAN cable for system
networking
Recommended cable type for CAN
connection
Input voltage
PRS 0002 A power supply
Maximum current consumption
Permissible operating temperature
Permissible storage temperature
Dimensions (H x W x D)
Weight
F.01U.028.089 | 5.4 | 2009.08
for switching between day/night mode, or
for switching local alarm on/off (internal/external alarm)
Product Information
LCD display with 320 x 240 pixels, touch screen
with 127.5 mm x 170 mm (5.0 in. x 6.7 in.) active
area
22 keys, 1 key switch, 11 LEDs
CAN1, CAN2, Ethernet 100BaseTX, USB (max.
3 m [10 ft] cable length), RS232 (max. 3 m [10
ft] cable length), 2 signal inputs (IN1/IN2)
L = 1000 m, depending on configuration,
max
cable type and topology
J-Y-ST/Y2x2x0.8
20 V DC to 30 V DC
+5 V DC ± 4.5%/max. 500 mA
- Standby mode: 120 mA at 24 V DC
- In the event of an alarm: 205 mA at 24 V DC
-5 °C to 50 °C
-20 °C to 70 °C
190 x 404 x 60 mm (7.5 x 15.0 x 2.4 inches)
Approx. 2000 g (4.4 lb)
Bosch Sicherheitssysteme GmbH
Modular Fire Panel