Eno 0000 B Fire Service Interface Module - Bosch FPA-5000 Product Information

40 en | Product Description
1.15.4

ENO 0000 B Fire Service Interface Module

The ENO 0000 B is used to connect fire service equipment:
–
–
–
–
–
NOTICE!
The requirements of the local fire department must be followed when programming the
module!
Labeling
A
B
C
Transmission unit
NQuit
GND
ÜE+ / ÜE-
1
2
5
8
6/7
9
10
FSE+ / −
⊗ + / −
Technical specifications
Display and operating elements
Input voltage
Current consumption
- In standby
- All relays triggered
- Key deposit heating
Permissible relay contact load
Dimensions (H x W x D)
Weight
F.01U.028.089 | 5.4 | 2009.08
Transmission unit to fire department
Key deposit
Signal lamp (e.g. BEGA flush-mounting lamp or BL 200)
Monitoring a release device
Four freely programmable change-over relays
Connector
Ground
Transmission unit control
Feedback contact
Automatic dialer and transmission unit fault
Acknowledge
Ground
Power supply of transmission unit
Monitoring key deposit
Ground
Door release magnet, + 12 V/24 V, approx. 10 W
Key deposit lock monitoring
Ground
Heating, +24 V, approx. 0.8 W
Ground
Monitoring of the release device
Signal lamp, e.g. BEGA lamp +24 V, approx. 10 W
Relays 1-4
Product Information
2 LEDs (1 x red, 1 x yellow)/1 button (LED test)
20 V DC to 30 V DC
25 mA
60 mA
Additional 240 mA
1 A/30 V
Approx. 127 x 96 x 60 mm (5.0 x 3.8 x 2.4 inches)
Approx. 150 g
Modular Fire Panel
Bosch Sicherheitssysteme GmbH