Hardware Accessories; Ups 2416 A Universal Power Supply 24 V/6 A - Bosch FPA-5000 Product Information

Modular Fire Panel
1.10

Hardware Accessories

1.10.1

UPS 2416 A Universal Power Supply 24 V/6 A

The UPS 2416 A is inserted into a power supply bracket and is ready for immediate operation.
It is protected against reverse polarity and surge. A green LED on the power supply unit
indicates its operational status. The temperature-dependent output voltage is monitored and
regulated by the BCM Battery Controller Module.
If 0 V is registered due to network failure or failure of the DC output voltage, the output FAULT
is triggered.
WARNING!
The UPS 2416 A may only be used in the specially designated brackets and in a cover that
protects against fire (such as a panel housing).
1
Item Labeling
1-2
3
4-5
6
7-8
Technical specifications
Input voltage range
Input frequency
Input current
Efficiency
Back-up time
Output voltage
Maximum output current
Maximum power
Cooling
Safety standards
Permissible operating
temperature
Permissible storage
temperature
Housing material and color
Bosch Sicherheitssysteme GmbH
2 3 4 5 6 7 8
LED
1 8
Connector
ACL / ACN Mains supply
Protective ground
DC+ / DC- 26.76 V DC output plus / 0 V DC output minus
FAULT Output mains fault
RTH+ / RTH- Thermal sensor plus/minus
Product Information
100 V AC to 240 V AC
50 Hz to 60 Hz
Max. 1.95 A
> 85%
> 16 ms at 115 V AC
26 V DC to 29 V DC
6 A
160 W (permanent)
Ventilation without ventilator
IEC 60950 / EN 60950
-5 °C to 50 °C (23 °F to 122 °F)
-20 °C to 60 °C (-4 °F to 140 °F)
Aluminum, anodized, black satin finish
Product Description | en 23
F.01U.028.089 | 5.4 | 2009.08