Bosch FPA-5000 Product Information page 50

50 en | Product Description
CRP 0000 A Cable Set Redundant Panel Controller
This cable set is needed for redundant connection of an MPC-xxxx-B Panel Controller with
another MPC-xxxx-B Panel Controller.
CPR 0001 A Printer Cable
The printer cable connects the RS232 port on the MPC-xxxx-B Panel Controller to the RS232
port on the RLE 0000 A or RLU 0000 A Junction Board.
The special flat connectors allow the controller's front panel to be fitted despite the presence
of a connector in the RS232 port.
The cable is needed to connect the THP 2020 Thermal Printer without an IOS 0232 A Module.
An RLE 0000 A Junction Board EU is required for this purpose. Cable length: 100 cm
CPB 0000 A Cable BCM/UPS
This cable connects a UPS 2416 A Universal Power Supply to the BCM Battery Controller
Module.
It is needed when using a PSS 0002 A, PSF 0002 A, PSB 0004 A or PMF 0004 A Power Supply.
Cable length: 150 cm
CBB 0000 A Cable Set BCM/Battery
This cable set connects the series-connected batteries to the BCM Battery Controller Module.
It is required with the following housings and housing combinations:
–
–
–
–
F.01U.028.089 | 5.4 | 2009.08
MPH 0010 A + PMF 0004 A /PSF 0002 A
EPH 0012 A + PMF 0004 A/PSF 0002 A
HBC 0010 A + PSB 0004 A/PSS 0002 A
HBE 0012 A + PSB 0004 A/PSS 0002 A
Product Information
Modular Fire Panel
Bosch Sicherheitssysteme GmbH