Control Techniques Commander SE Series User Manual page 5

Declaration of Conformity
Control Techniques, The Gro, Newtown, Powys, UK. SY16 3BE
SE11200025
SE2D200075
SE23200400
SE23400150
SE33200550
SE43401100
The AC variable speed drive products listed above, have been designed and
manufactured in accordance with the following European harmonised, national
and international standards:
EN60249
IEC326-1
IEC326-5
IEC326-6
IEC664-1
EN60529
UL94
UL508C
*EN50081-1
EN50081-2
EN50082-2
EN61800-3
*Applies to Size 1 units only.
These products comply with the Low Voltage Directive 73/23/EEC, the
Electromagnetic Compatibility (EMC) Directive 89/336/EEC and the CE Marking
Directive 93/68/EEC.
These electronic Drive products are intended to be used with appropriate
motors, controllers, electrical protection components and other equipment
to form complete end products or systems. Compliance with safety and EMC
regulations depends upon installing and configuring Drives correctly,
including using the specified input filters. The Drives must be installed only
by professional assemblers who are familiar with requirements for safety
and EMC. The assembler is responsible for ensuring that the end product or
system complies with all the relevant laws in the country where it is to be
used. Refer to this User Guide. A Commander SE EMC Data Sheet is also
available giving detailed EMC information.
Commander SE User Guide
Issue Number 5
SE11200037 SE11200055
SE2D200110 SE2D200150
SE23400075
SE23400220 SE23400300
SE33400550 SE33200750
SE43401500
Base materials for printed circuits
Printed boards: general information for the specification writer
Printed boards: specification for single- and double-sided printed boards
with plated-through holes
Printed boards: specification for multilayer printed boards
Insulation co-ordination for equipment within low-voltage systems:
principles, requirements and tests
Degrees of protection provided by enclosures (IP code)
Flammability rating of plastic materials
Standard for power conversion equipment
Generic emission standard for the residential, commercial and light
industrial environment
Generic emission standard for the industrial environment
Generic immunity standard for the industrial environment
Adjustable speed electrical power drive systems - Part 3: EMC product
standard including specific test methods
W. Drury
Executive VP Technology
Date: 8th March 2000
SE11200075
SE2D200220
SE23400110
SE23400400
SE33400750
1