Honda Hawk GT NT650 1988 Service Manual page 99

FLYWHEEL REMOVAL
Remove the starter idle/reduction gear by removing the shaft.
ALTERNATOR/STARTER CLUTCH
• The flywheel bolt has left-hand threads.
Hold the flywheel with the flywheel holder and remove the fly-
wheel bolt and washer.
TOOL:
Flywheel holder
NOTE
07725-0040000
Equivalent
commercially available in U.S.A.
Remove the flywheel with the rotor puller.
TOOL:
Rotor
puller
07733-0020001 or
07933-3290001
,
.
Remove the needle bearing from the crankshaft, then remove
the woodruff key.
NOTE
• Do not lose the woodruff key.
8-3