Honda Hawk GT NT650 1988 Service Manual page 156

FRONT WHEEL
REMOVAL
Raise the front wheel off the ground.
Disconnect the speedometer cable from the speedometer gear
box by removing the cable set screw.
Remove the brake caliper mounting bolts and brake caliper.
CAUTION
Support the caliper assembly so that it does not hang on the
brake hose. Do not twist the brake hose.
NOTE
If you squeeze the front brake lever after the caliper is re-
moved, the caliper piston will move out and make assembly
difficult.
Loosen the right and left front axle pinch bolts, and remove the
axle bolt.
Remove the axle and the front wheel.
Remove the side collar from the right side and remove the
speedometer gear box from the left side.
FRONT WHEEl/SUSPENSION/STEERING
12-7