Honda Hawk GT NT650 1988 Service Manual page 85

ENGINE INSTALLATION
Install the engine into the frame correctly.
Engine installation is essentially the reverse order of removal.
Use a floor jack or other adjustable support to carefully
manuever the engine into place.
CAUTION
Carefully align the mounting points with the jack to prevent •
damage
to
mounting bolt threads and wire harness and cables.
Insert the swingarm pivot bolt while aligning the serrations of
the pivot bolt and adjusting bolt.
ENGINE REMOVAL/INSTALLATION
(2) ADJUSTING BOLT
~
-
\
Turn the pivot bolt with the adjusting bolt clockwise fully to
seat the swingarm left pivot collar.
Tighten the bolt to the specified torque.
TORQUE: 15 N'm (1 .5 kg-m, 11 ft-Ibl
.
.
(1) PIVOTIADJUSTING BOLT
\
TORQUE:
Actual: 65 N'm (6.5 kg-m, 47 ft-Ib)
Indicated: 59 N'm 15.9 kg-m, 43 ft-Ibl
Install the lock nut onto the adjusting bolt.
Tighten the lock nut to the specified torque while holding the
pivot bolt and adjusting bolt together.
TOOL:
Lock nut wrench 07908-ME90000
6-5