Honda Hawk GT NT650 1988 Service Manual page 186

REAR WHEEL/SUSPENSION
Pull the pivot bolt out the frame while supporting the swing-
arm.
Remove the swingarm from the frame.
Remove the pivot collars and bushing.
DISASSEMBLY
Remove the following components:
- drive chain slider
- driven sprocket guard plate
- brake disc guard plate
- brake torque rod
- shock absorber drain tube clamp
- brake hose clamp
(6) BRAKE HOSE CLAMP
(2) DRIVEN SPROCKET (3) BRAKE DISC
GUARD PLATE GUARD PLATE
PIVOT BEARING REPLACEMENT
(1) SNAP RING,
Remove the dust seals from the swingarm.
Remove the snap ring from the right side.
(2) SWINGARM
13-20