Honda Hawk GT NT650 1988 Service Manual page 161

FRONT WHEEl/SUSPENSION/STEERING
INSTALLATION
Position the wheel between the fork legs.
Insert the axle from the leftside, through the left fork leg and
wheel hub.
Position the tang on the speedometer gear box against the
back of the lug on the left fork leg.
Insert and tighten the axle bolt.
TORQUE: 60 N'm (6.0 kg-m. 43 ft-Ibl
Tighten the axle pinch bolts.
TORQUE: 22 N'm (2.2 kg-m. 16 ft-Ibl
Install the brake caliper with the caliper bracket.
Install the caliper mounting bolts and tighten the bolts.
TORQUE: 27 N'm (2.7 kg-m. 20 ft-Ibl
Connect the speedomater cable with the set screw.
FORK
REMOVAL
Remove the following:
- handlebars (page 12-3).
- front wheel (page 12-7).
- brake caliper (page 14-11).
- mounting bolts and fender.
12-12
(1) CALIPER
_ _;.:M.OllliL1NG SOLTS