Honda Hawk GT NT650 1988 Service Manual page 98

ALTERNATOR/STARTER CLUTCH
LEFT CRANKCASE COVER REMOVAL
Disconnect the alternator wire 3P connector (WHITE).
Remove the gearshift arm pinch bolt and shiftarm from the
spindle.
Remove the drive sprocket cover.
Place a container under the left crankcase cover to catch the
engine oil.
Remove the eleven left crankcase cover bolts and the cover.
Remove the dowel pins and gasket.
STATOR REPLACEMENT
Remove the wire clamp bolts and the clamps.
Remove the stator mounting bolts and stator.
Position the new stator and the grommets in the cover.
Apply a locking agent to the threads of the stator mounting
bolts.
Tighten the stator mounting bolts and the clamp bolts.
8-2