Honda Hawk GT NT650 1988 Service Manual page 145

CRANKSHAFT/TRANSMISSION
Oil jet
Remove the oil jets from the front cylinder bore of the right and
left crankcase.
Check the O-ring for fatique and damage.
Check the oil jet orifice for clogging.
TRANSMISSION ASSEMBLY/
INSTALLATION
Apply MOS2 grease to the shift fork journals of M3, C4 and C5
gears.
Clean all parts in solvent and dip them in clean engine oil.
CAUTION
Align the oil holes in the bushings and gears with the oil holes in
the shaft.
Mainshaft
11-14
o0q)(()OO 00
M5 M3